Ideas Porch Swing Plans With Stand
Porch swing plans with stand – Instead of buying a high-priced porch swing that may not be of good quality. Build one for much less than buying one in a store, and with much better quality. The construction of a gantry swing is not difficult when using the right tools. When you build your own gantry swing, you can design it to exactly fit your needs and tastes, without settling for anything.
Porch swing plans with stand, the creation of two easels on a flat surface to use when making cuts in your wood. Determine the depth of the seat and the height of the backrest that you want the swing to be and then measure that length of the wooden poles 2 by 4 and mark it with a pencil. Cut six supports from the 2-by-4 to the appropriate length by setting the tables on the easels and cutting them to the marks with a circular saw. This will give you three supports for the back of the half-turn and three for the seat.
Porch swing plans with stand, contours of cut in the supports, if you want with curves that give in the seat and perhaps exceeded the support of the back using the jigsaw. The outlines are totally up to you. The design is not important as long as all the pieces are the same. Each support of soft sand using a sander. Connect a seat support and a back support to each other by means of two body bolts, four washers and two nuts in each section by drilling holes large enough to hold the carriage bolts with a drill and drill bit.