Ideas To Make Log Swing Plans

Log swing plans – A cedar wood swing can add a unique look to your backyard and provide many hours of enjoyment. If you have some knowledge of woodworking, you can build your own cedar wood swing in a day or less. Cut 45 degree angles at both ends of the four 97-inch registers. The angles of each record must run in opposite directions. Place two of the cedar trunks 97 inches above the ground in a V-shape. Arrange them so that the ends are exactly 72 inches apart. Do the same with the other two records.

New Log Swing Plans

Drill two pilot holes in the cups of the 97-inch log swing plans at the point where the angles meet at the top of the V. Use two large screws, at least 8 inches in length, to connect the registers together at the top. Place a washer and a nut on the end of the bolt and tighten with a ratchet or wrench. Join the other set of records together in the same way.

Related :  Choosing Good Front Porch Column Ideas

Log swing plans, chisel both ends of the 84-inch trunk to create a wedge shape that fits perfectly into the angles formed by the top of the frame. Drill a hole from the top of the 84-inch record from the bottom. The hole should be 8 inches from each end of the center column. Who will use these holes to suspend the chair.

24 Ideas To Make Log Swing Plans Photos